Chapter 24 Web Authentication
UAG4100 User’s Guide
234
The following table gives an overview of the objects you can configure.
24.3.1 Adding/Editing a Walled Garden URL
Click Configuration > Web Authentication and then the Add (or Edit) icon in the Walled
Garden Summary section to open the Add/Edit Walled Garden URL screen. Use this screen to
configure a walled garden web site address entry.
Note: You can configure up to 20 walled garden URL links.
Figure 159 Configuration > Web Authentication > Walled Garden > Add/Edit
Table 103 Configuration > Web Authentication > Walled Garden
LABEL DESCRIPTION
Enable Walled
Garden
Select this to turn on the walled garden feature.
Note: This feature works only when you set web authentication to Web Portal.
Walled Garden
Summary
Use this table to manage the list of walled garden links.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Move To move an entry to a different number in the list, click the Move icon. In the field that
appears, specify the number to which you want to move the interface.
# This field is a sequential value, and it is not associated with any entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Display This icon is lit when the web site link is set to display in the user login screen.
Name This field displays the descriptive name of web site.
URL This field displays the address of web site.
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.
To Next Page
Loading...
