ZyXEL Communications UAG4100 - Advertisement Screen

Chapter 24 Web Authentication
UAG4100 User’s Guide
236
24.4 Advertisement Screen
Use this screen to set the UAG to display an advertisement web page as the first web page
whenever the user connects to the Internet.
Click Configuration > Web Authentication > Advertisement to display the screen.
Figure 161 Configuration > Web Authentication > Advertisement
The following table gives an overview of the objects you can configure.
Table 105 Configuration > Web Authentication > Advertisement
LABEL DESCRIPTION
Enable
Advertisement
Select this to turn on the advertisement feature.
Note: This feature works only when you enable web authentication.
Advertisement
Summary
Use this table to manage the list of advertisement web pages.
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Move To move an entry to a different number in the list, click the Move icon. In the field that
appears, specify the number to which you want to move the interface.
# This field is a sequential value, and it is not associated with any entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the descriptive name of web site.
URL This field displays the address of web site.
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.