Chapter 34 Services
UAG4100 User’s Guide
329
34.3 The Service Group Summary Screen
The Service Group summary screen provides a summary of all service groups. In addition, this
screen allows you to add, edit, and remove service groups.
To access this screen, log in to the Web Configurator, and click Configuration > Object > Service
> Service Group.
Figure 220 Configuration > Object > Service > Service Group
The following table describes the labels in this screen. See Section 34.3.1 on page 329 for more
information as well.
34.3.1 The Service Group Add/Edit Screen
The Service Group Add/Edit screen allows you to create a new service group or edit an existing
one. To access this screen, go to the Service Group screen (see Section 34.3 on page 329), and
click either the Add icon or an Edit icon.
Table 159 Configuration > Object > Service > Service Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See Section 10.3.2 on page 123 for an example.
# This field is a sequential value, and it is not associated with a specific service group.
Name This field displays the name of each service group.
By default, the UAG uses services starting with “Default_Allow_” in the firewall rules to
allow certain services to connect to the UAG.
Description This field displays the description of each service group, if any.
To Next Page
Loading...
