ZyXEL Communications UAG4100 - ISP Account Edit

Chapter 39 ISP Accounts
UAG4100 User’s Guide
360
39.2.1 ISP Account Edit
The ISP Account Edit screen lets you add information about new accounts and edit information
about existing accounts. To open this window, open the ISP Account screen. (See Section 39.2 on
page 359.) Then, click on an Add icon or Edit icon to open the ISP Account Edit screen below.
Figure 240 Configuration > Object > ISP Account > Edit
The following table describes the labels in this screen.
# This field is a sequential value, and it is not associated with a specific entry.
Profile Name This field displays the profile name of the ISP account. This name is used to identify the
ISP account.
Protocol This field displays the protocol used by the ISP account.
Authentication
Type
This field displays the authentication type used by the ISP account.
User Name This field displays the user name of the ISP account.
Table 175 Configuration > Object > ISP Account (continued)
LABEL DESCRIPTION
Table 176 Configuration > Object > ISP Account > Edit
LABEL DESCRIPTION
Profile Name This field is read-only if you are editing an existing account. Type in the profile name of the
ISP account. The profile name is used to refer to the ISP account. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Protocol This field is read-only if you are editing an existing account. Select the protocol used by the
ISP account. Options are:
pppoe - This ISP account uses the PPPoE protocol.
pptp - This ISP account uses the PPTP protocol.