ZyXEL Communications UAG4100 - The NAT Add;Edit Screen

Chapter 15 NAT
UAG4100 User’s Guide
181
15.2.1 The NAT Add/Edit Screen
The NAT Add/Edit screen lets you create new NAT rules and edit existing ones. To open this
window, open the NAT summary screen. (See Section 15.2 on page 180.) Then, click on an Add
icon or Edit icon to open the following screen.
Figure 109 Configuration > Network > NAT > Add
The following table describes the labels in this screen.
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.
Table 82 Configuration > Network > NAT (continued)
LABEL DESCRIPTION
Table 83 Configuration > Network > NAT > Add
LABEL DESCRIPTION
Create new Object Use to configure any new settings objects that you need to use in this screen.
Enable Rule Use this option to turn the NAT rule on or off.