Chapter 27 Printer Manager
UAG4100 User’s Guide
271
27.3 The Printout Configuration Screen
Use this screen to customize the account printout. Click Configuration > Printer Manager >
Printout Configuration to open the following screen.
Figure 186 Configuration > Printer Manager > Printout Configuration
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The UAG confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with any entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
IPv4 Address This field displays the IP address of the printer.
Description This field displays the descriptive name for the printer.
Printer Firmware
Information
Current Version This is the version of the printer firmware currently uploaded to the UAG. The UAG
automatically installs it in the connected printers to make sure the printers are upgraded to
the same version.
Apply Click this button to save your changes to the UAG.
Reset Click this button to return the screen to its last-saved settings.
Table 124 Configuration > Printer Manager > General (continued)
LABEL DESCRIPTION
To Next Page
Loading...
