Chapter 42 File Manager
UAG4100 User’s Guide
426
Figure 297 Firmware Upload Error
42.4 The Shell Script Screen
Use shell script files to have the UAG use commands that you specify. Use a text editor to create the
shell script files. They must use a “.zysh” filename extension.
Click Maintenance > File Manager > Shell Script to open the Shell Script screen. Use the
Shell Script screen to store, name, download, upload and run shell script files. You can store
multiple shell script files on the UAG at the same time.
Note: You should include write commands in your scripts. If you do not use the write
command, the changes will be lost when the UAG restarts. You could use multiple
write commands in a long script.
Figure 298 Maintenance > File Manager > Shell Script
To Next Page
Loading...
