ZyXEL Communications UAG4100 - Station Count of AP

Chapter 7 Monitor
UAG4100 User’s Guide
92
7.12.1 Station Count of AP
Use this screen to look at station statistics for the connected AP. To access this screen, select an
entry and click the More Information button in the AP List screen.
Figure 59 Monitor > Wireless > AP Information > AP List > Station Count of AP
The following table describes the labels in this screen.
Table 34 Monitor > Wireless > AP Information > AP List > Station Count of AP
LABEL DESCRIPTION
Configuration
Status
This displays whether or not any of the AP’s configuration is in conflict with the UAG’s
settings for the AP.
Non Support If any of the AP’s configuration conflicts with the UAG’s settings for the AP, this field
displays which configuration conflicts. It displays n/a if none of the AP’s configuration
conflicts with the UAG’s settings for the AP.
Station Count
The y-axis represents the number of connected stations.
The x-axis shows the time over which a station was connected.
Last Update This field displays the date and time the information in the window was last updated.