Chapter 7 Monitor
UAG4100 User’s Guide
91
The following table describes the icons in this screen.
Model This displays the AP’s model number.
Mgnt. VLAN
ID(AC/AP)
This displays the Access Controller (the UAG) management VLAN ID setting for the AP and
the runtime management VLAN ID setting on the AP.
VLAN Conflict displays if the AP’s management VLAN ID does not match the UAG’s
management VLAN ID setting for the AP. This field displays n/a if the UAG cannot get
VLAN information from the AP.
Description This displays the AP’s associated description. The default description is “AP-” + the AP’s
MAC Address.
Station This displays the number of stations (aka wireless clients) associated with the AP.
Recent On-line
Time
This displays the most recent time the AP came on-line. N/A displays if the AP has not
come on-line since the UAG last started up.
Last Off-line
Time
This displays the most recent time the AP went off-line. N/A displays if the AP has either
not come on-line or gone off-line since the UAG last started up.
Table 33 Monitor > Wireless > AP Information > AP List Icons
LABEL DESCRIPTION
This AP is not on the management list.
This AP is on the management list and online.
This AP is in the process of having its firmware updated.
This AP is on the management list but offline.
This indicates one of the following cases:
• This AP has a runtime management VLAN ID setting that conflicts with the VLAN ID setting on
the Access Controller (the UAG).
• A setting the UAG assigns to this AP does not match the AP’s capability.
Table 32 Monitor > Wireless > AP Information > AP List (continued)
LABEL DESCRIPTION
To Next Page
Loading...
