ZyXEL Communications UAG4100 - Log Settings Summary

Chapter 41 Log and Report
UAG4100 User’s Guide
406
The Log Settings screens control what information the UAG saves in each log. You can also specify
which log messages to e-mail for the system log, and where and how often to e-mail them. These
screens also set for which events to generate alerts and where to email the alerts.
The first Log Settings screen provides a settings summary. Use the Edit screens to configure
settings such as log categories, e-mail addresses, and server names for any log. Use the Log
Category Settings screen to edit what information is included in the system log, USB storage, e-
mail profiles, and remote servers.
41.3.1 Log Settings Summary
To access this screen, click Configuration > Log & Report > Log Settings.
Figure 284 Configuration > Log & Report > Log Settings
The following table describes the labels in this screen.
Table 197 Configuration > Log & Report > Log Settings
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where you can modify it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific log.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.