ZyXEL Communications UAG4100 - Edit AP List

Chapter 9 Wireless
UAG4100 User’s Guide
110
9.3.1 Edit AP List
Select an AP and click the Edit button in the Configuration > Wireless > AP Management table
to display this screen.
Figure 73 Configuration > Wireless > AP Management > Edit AP List
Each field is described in the following table.
Model This field displays the AP’s hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the UAG and the information is
unavailable as a result.
R1 Mode / Profile This field displays the operating mode (AP) and AP profile name for Radio 1. It displays
n/a for the profile for a radio not using an AP profile.
R2 Mode / Profile This field displays the operating mode (AP) and AP profile name for Radio 2. It displays
n/a for the profile for a radio not using an AP profile.
Mgnt. VLAN ID(AC) This displays the Access Controller (the UAG) management VLAN ID setting for the AP.
Mgnt. VLAN ID(AP) This displays the runtime management VLAN ID setting on the AP. VLAN Conflict
displays if the AP’s management VLAN ID does not match the Mgnt. VLAN ID(AC).
This field displays n/a if the UAG cannot get VLAN information from the AP.
Description This field displays the AP’s description, which you can configure by selecting the AP’s
entry and clicking the Edit button.
Table 46 Configuration > Wireless > AP Management (continued)
LABEL DESCRIPTION
Table 47 Configuration > Wireless > AP Management > Edit AP List
LABEL DESCRIPTION
Create new Object Use this menu to create a new Radio Profile object to associate with this AP.
Configuration