ZyXEL Communications UAG4100 - HTTPS Example

Chapter 40 System
UAG4100 User’s Guide
384
40.7.7 HTTPS Example
If you haven’t changed the default HTTPS port on the UAG, then in your browser enter “https://UAG
IP Address/” as the web site address where “UAG IP Address” is the IP address or domain name of
the UAG you wish to access.
40.7.7.1 Internet Explorer Warning Messages
When you attempt to access the UAG HTTPS server, you will see the error message shown in the
following screen.
Figure 257 Security Alert Dialog Box (Internet Explorer)
Select Continue to this website to proceed to the Web Configurator login screen. Otherwise,
select Click here to close this webpage to block the access.
40.7.7.2 Mozilla Firefox Warning Messages
When you attempt to access the UAG HTTPS server, a The Connection is Untrusted screen
appears as shown in the following screen. Click Technical Details if you want to verify more
information about the certificate from the UAG.
Select I Understand the Risks and then click Add Exception to add the UAG to the security
exception list. Click Confirm Security Exception.
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.
Table 189 Configuration > System > WWW > Login Page
LABEL DESCRIPTION