UAG4100 User’s Guide
105
CHAPTER 8
Registration
8.1 Overview
Use the Configuration > Licensing > Registration screens to register your UAG and manage its
service subscriptions.
8.1.1 What You Can Do in this Chapter
•Use the Registration screen (see Section 8.2 on page 106) to register your UAG with
myZyXEL.com.
•Use the Service screen (see Section 8.3 on page 106) to display the status of your service
registrations and upgrade licenses.
8.1.2 What you Need to Know
This section introduces the topics covered in this chapter.
myZyXEL.com
myZyXEL.com is ZyXEL’s online services center where you can register your UAG and manage
subscription services available for the UAG. To use a subscription service, you have to register the
UAG and activate the corresponding service at myZyXEL.com (through the UAG).
Note: You need to create a myZyXEL.com account before you can register your device
and activate the services at myZyXEL.com.
Go to http://portal.myZyXEL.com with the UAG’s serial number and LAN MAC address to register it.
Refer to the web site’s on-line help for details.
Note: To activate a service on a UAG, you need to access myZyXEL.com via that UAG.
Subscription Services Available on the UAG
At the time of writing, the UAG can use the upgrade service to extend the maximum number of the
supported managed APs and the LAN/WLAN users that can connect to the UAG at one time.
Maximum Number of Managed APs
The UAG is initially configured to support up to one local AP and 8 remote managed APs (such as
the NWA5123-NI). You can increase this by subscribing to additional licenses. As of this writing,
each license upgrade allows an additional 8 remote managed APs while the maximum number of
remote managed APs a single UAG can support is 16.
To Next Page
Loading...
