Chapter 10 Interfaces
UAG4100 User’s Guide
117
10.3.1 Ethernet Edit
The Ethernet Edit screen lets you configure IP address assignment, interface parameters, DHCP
settings, connectivity check, and MAC address settings. To access this screen, select an entry in the
Ethernet summary screen and click the Edit icon. (See Section 10.3 on page 115.)
Note: If you create IP address objects based on an interface’s IP address, subnet, or
gateway, the UAG automatically updates every rule or setting that uses the object
whenever the interface’s IP address settings change. For example, if you change
the LAN’s IP address, the UAG automatically updates the corresponding interface-
based, LAN subnet address object.
To Next Page
Loading...
