Chapter 24 Web Authentication
UAG4100 User’s Guide
235
The following table gives an overview of the objects you can configure.
24.3.2 Walled Garden Login Example
The following figure shows the user login screen with two walled garden links. The links are named
WalledGardenLink1 through 2 for demonstration purposes.
Figure 160 Walled Garden Login Example
Table 104 Configuration > Web Authentication > Walled Garden > Add/Edit
LABEL DESCRIPTION
Enable Select this to activate the entry.
Hide in login
page
Select this to not display the web site link in the user login screen.
This is helpful if a user’s access to a specific web site is required to stay connected but he
or she doesn’t need to visit that web site.
Name Enter a descriptive name for the walled garden link to be displayed in the login screen.
You can use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and underscores (_). Spaces
are also allowed. The first character must be a letter.
URL Enter the URL or IP address of the web site.
Use “http://” followed by up to 262 characters (0-9a-zA-Z;/?:@&=+$\.-_!~*'()%). For
example, http://www.example.com or http://172.16.1.35.
Preview Click this button to open the specified web site in a new frame.
OK Click OK to save your changes back to the UAG.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
