Chapter 12 Policy and Static Routes
UAG4100 User’s Guide
165
Figure 99 Configuration > Network > Routing > Policy Route > Add/Edit
The following table describes the labels in this screen.
Table 73 Configuration > Network > Routing > Policy Route > Add/Edit
LABEL DESCRIPTION
Show / Hide
Advanced
Settings
Click this button to display a greater or lesser number of configuration fields.
Create new
Object
Use this to configure any new settings objects that you need to use in this screen.
Configuration
Enable Select this to activate the policy.
Description Enter a descriptive name of up to 31 printable ASCII characters for the policy.
Criteria
User Select a user name or user group from which the packets are sent.
Incoming Select where the packets are coming from; any, an interface, or the UAG itself (Device).
For an interface, you also need to select the individual interface.
To Next Page
Loading...
