Chapter 25 Firewall
UAG4100 User’s Guide
248
Figure 169 Firewall Example: Firewall Screen
2 At the top of the screen, click Create new Object > Address to configure an address object.
Configure it as follows and click OK.
Figure 170 Firewall Example: Create an Address Object
3 Click Create new Object > Service to configure a service object for Doom (UDP port 666).
Configure it as follows and click OK.
Figure 171 Firewall Example: Create a Service Object
4 Select From WAN and To LAN and enter a name for the firewall rule.
Select Dest_1 for the Destination and Doom as the Service. Enter a description and configure
the rest of the screen as follows. Click OK when you are done.
To Next Page
Loading...
