Chapter 40 System
UAG4100 User’s Guide
377
Figure 252 Configuration > System > WWW > Service Control
The following table describes the labels in this screen.
Table 187 Configuration > System > WWW > Service Control
LABEL DESCRIPTION
HTTPS
Enable Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the UAG Web
Configurator using secure HTTPs connections.
Server Port The HTTPS server listens on port 443 by default. If you change the HTTPS server port
to a different number on the UAG, for example 8443, then you must notify people who
need to access the UAG Web Configurator to use “https://UAG IP Address:8443” as
the URL.
To Next Page
Loading...
