ZyWALL USG Series User’s Guide
266
CHAPTER 8
Licensing
8.1 Registration Overview
Use the Configuration > Licensing > Registration screens to register your Zyxel Device and manage its
service subscriptions.
• Use the Registration screen (see Section 8.1.2 on page 266) to refresh Zyxel Device registration, go to
portal.myZyxel.com to register your Zyxel Device and activate a service, such as content filtering.
• Use the Service screen (see Section 8.1.3 on page 267) to display the status of your service
registrations and upgrade licenses.
Note: ZyWALL models need a license for UTM (Unified Threat management) functionality.
8.1.1 What you Need to Know
This section introduces the topics covered in this chapter.
Subscription Services Available
See Configuration > Licensing > Registration > Service for the subscription services that your Zyxel Device
supports.
ZyWALL models need a license for UTM (Unified Threat Management) functionality - see Section 1.1 on
page 28 for details.
You can purchase an iCard and enter its license key at myZyxel to have a Zyxel Device use UTM services
or use more counts of a service or extend a service. See the respective chapters in this guide for more
information about UTM features.
8.1.2 Registration Screen
Click the link in this screen to register your Zyxel Device at myZyxel. Then click Refresh in this screen and
wait a few moments for the registration information to update. If the page does not refresh, make sure
the Internet connection is working and click Refresh again. The Zyxel Device should already have
Internet access and be able to access myZyxel. Click Configuration > Licensing > Registration in the
navigation panel to open the screen as shown next.
Click on the icon to go to the OneSecurity website where there is guidance on configuration
walkthrough and other information.
To Next Page
Loading...
