Chapter 41 SSL Inspection
ZyWALL USG Series User’s Guide
771
41.2.1 Add / Edit SSL Inspection Profiles
Click Configuration > UTM Profile > SSL Inspection > Profile > Add to create a new profile or select an
existing profile and click Edit to change its settings.
Figure 531 Configuration > UTM Profile > SSL Inspection > Profile > Add / Edit
The following table describes the fields in this screen.
References Select an entry and click References to open a screen that shows which settings use the
entry. Click Refresh to update information on this screen.
# This is the entry’s index number in the list.
Name This displays the name of the profile.
Description This displays the description of the profile.
CA Certificate This displays the CA certificate being used in this profile.
Reference This displays the number of times an object reference is used in a profile.
Table 282 Configuration > UTM Profile > SSL Inspection > Profile (continued)
LABEL DESCRIPTION
Table 283 Configuration > UTM Profile > SSL Inspection > Profile > Add / Edit
LABEL DESCRIPTION
Name This is the name of the profile. You may use 1-31 alphanumeric characters, underscores(_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive. These are
valid, unique profile names:
• MyProfile
• mYProfile
• Mymy12_3-4
These are invalid profile names:
• 1mYProfile
• My Profile
• MyProfile?
• Whatalongprofilename123456789012
Description Enter additional information about this SSL Inspection entry. You can enter up to 60 characters
("0-9", "a-z", "A-Z", "-" and "_").
CA Certificate This contains the default certificate and the certificates created in Object > Certificate > My
Certificates. Choose the certificate for this profile.
To Next Page
Loading...
