Chapter 4 Easy Mode
ZyWALL USG Series User’s Guide
83
Go back to Easy Mode to edit your settings on EZ_ rules. If you edit an EZ_ rule in Expert Mode, the
corresponding policies created in Easy Mode may work differently.
You cannot delete EZ_ objects or rules if they are used in a policy. To delete an EZ_ object or rule, you
need to delete all corresponding policies. If you delete an EZ_ object or rule in Expert Mode, the
corresponding policies created in Easy Mode may not work.
4.1.2 Wizards and Links
In the wizards, click the question mark on the right to display or hide the help. Click Next > to continue
to the following screen, < Back to return to the previous screen and Exit or X (top right) to close the
wizard screen without saving any changes.
The following are the Easy Mode wizards and links.
Figure 61 Easy Mode Wizards and Links
Table 20 Editing & Deleting EZ_ Objects
OBJECT/
RULE
SCREEN EDIT DELETE
X: The action is not allowed.
V: The action is allowed.
guest
interface
Configuration > Network > Interface > Ethernet X X
Content
filtering
Configuration > UTM Profile V V
IDP VV
Anti-Virus VV
Static DHCP
Binding
Configuration > Network > IP/MAC Binding X V
Address XV
Connection Configuration > VPN > IPSec VPN X V
Gateway XV
AP group Configuration > Wireless X V
Radio XV
NAT Configuration > Network > NAT X V
Security policy Configuration > Security Policy X V
Zone Configuration > Object X V
AP profile XV
Security XV
SSID XV
Address/Geo
IP
XV
Service XV
To Next Page
Loading...
