Chapter 10 Interfaces
ZyWALL USG Series User’s Guide
329
10.5.5 Add/Edit DHCPv6 Request/Release Options
When you configure an interface as a DHCPv6 server or client, you can additionally add DHCPv6
request or lease options which have the Zyxel Device to add more information in the DHCPv6 packets.
To open the screen, click Configuration > Network > Interface > Ethernet > Edit, select DHCPv6 Server or
DHCPv6 Client in the DHCPv6 Setting section, and then click Add in the DHCPv6 Request Options or
DHCPv6 Lease Options table.
Figure 251 Configuration > Network > Interface > Ethernet > Edit > Add DHCPv6 Request/Lease Options
Select a DHCPv6 request or lease object in the Select one object field and click OK to save it. Click
Cancel to exit without saving the setting.
10.5.6 Add/Edit DHCP Extended Options
When you configure an interface as a DHCPv4 server, you can additionally add DHCP extended
options which have the Zyxel Device to add more information in the DHCP packets. The available fields
vary depending on the DHCP option you select in this screen. To open the screen, click Configuration >
Network > Interface > Ethernet > Edit, select DHCP Server in the DHCP Setting section, and then click Add
or Edit in the Extended Options table.
Figure 252 Configuration > Network > Interface > Ethernet > Edit > Add/Edit Extended Options
The following table describes labels that can appear in this screen.
Table 110 Configuration > Network > Interface > Ethernet > Edit > Add/Edit Extended Options
LABEL DESCRIPTION
Option Select which DHCP option that you want to add in the DHCP packets sent through the
interface. See the next table for more information.
Name This field displays the name of the selected DHCP option. If you selected User Defined in the
Option field, enter a descriptive name to identify the DHCP option. You can enter up to 16
characters (“a-z”, “A-Z, “0-9”, “-”, and “_”) with no spaces allowed. The first character must be
alphabetical (a-z, A-Z).
To Next Page
Loading...
