Chapter 14 Redirect Service
ZyWALL USG Series User’s Guide
452
User Select the user account or user group name to which this rule is applied.
Interface Select the interface on which the request must be received for the Zyxel Device to
forward it to the specified server.
Source Address Select the name of the source IP address object from which the traffic should be
sent. Select any for the rule to be effective for every source.
Redirect Settings
Server Enter the IP address of the HTTP proxy or SMTP server.
Port Enter the port number that the HTTP proxy or SMTP server uses.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving.
Table 157 Network > Redirect Service > Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
