Chapter 22 Printer Manager
ZyWALL USG Series User’s Guide
542
# This field is a sequential value, and it is not associated with any entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive. Click the
Connection icon for the Zyxel Device connect to the printer.
IPv4 Address This field displays the IP address of the printer.
Update Time This field displays the date and time the Zyxel Device last synchronized with the printer.
This shows n/a when the printer is not in the managed printer list or the printer status is sync fail
or sync progressing.
Status This field is hidden by default. It displays whether the Zyxel Device can connect to the printer
and update the printer information.
This shows n/a when the printer is not in the managed printer list.
Nickname This shows an optional friendly name for the printer that you configured.
Firmware Version This field displays the model number and firmware version of the printer.
This shows n/a when the printer is not in the managed printer list or the printer status is sync fail.
MAC This shows the hardware MAC address of the printer.
Description This field displays the descriptive name for the printer that you configured.
Printer Firmware
Information
Current Version This is the version of the printer firmware currently uploaded to the Zyxel Device. The Zyxel
Device automatically installs it in the connected printers to make sure the printers are
upgraded to the same version.
Hotspot Service
Status
The hotspot license must be registered in order to be activated.
Service Status This field displays whether a service license is enabled at myZyxel (Activated) or not (Not
Activated) or expired (Expired). It displays the remaining Grace Period if your license has
Expired. It displays Not Licensed if there isn’t a license to be activated for this service.
If you need a license or a trial license has expired, click Buy to buy a new one. If a Standard
license has expired, click Renew to extend the license.
Then, click Activate to connect with the myZyxel server to activate the new license.
Service Type This shows whether you have a trial or standard license or none (Trial, Standard, None).
Expiration
Date
This shows when your hotspot license will expire.
Apply Click this button to save your changes to the Zyxel Device.
Reset Click this button to return the screen to its last-saved settings.
Table 187 Configuration > Hotspot > Printer Manager > General (continued)
LABEL DESCRIPTION
To Next Page
Loading...
