Chapter 22 Printer Manager
ZyWALL USG Series User’s Guide
545
General > Add to manually configure a printer’s IP address and add it to the managed printer list when
the printer is not detected or connected to the Zyxel Device.
Figure 385 Configuration > Hotspot > Printer Manager > General: Discover Printer
The following table describes the labels in this screen.
Table 190 Configuration > Hotspot > Printer Manager > General > Discover Printer
LABEL DESCRIPTION
Un-Mgnt Printer
List / Mgnt Printer
List
The tables displays according to whether the printer is in the unmanaged printer list (Un-Mgnt
Printer List) or the managed printer list (Mgnt Printer List).
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Note: You cannot edit an entry’s settings when the printer status is sync fail or sync
progressing.
Add to Mgnt
Printer List
Click this to add the selected printer to the managed printer list.
# This is the index number of the printer in the list.
Registration This field displays whether the printer is added to the managed printer list (Mgnt Printer) or not
(Un-Mgnt Printer).
IPv4 Address This field displays the IP address of the printer.
Update Time This field displays the date and time the Zyxel Device last synchronized with the printer.
This shows n/a when the printer is not in the managed printer list or the printer status is sync fail
or sync progressing.
Status This field displays whether the Zyxel Device can connect to the printer and update the printer
information.
This shows n/a when the printer is not in the managed printer list.
Nickname This field displays the optional friendly name of the printer that you configured.
Firmware Version This field displays the model number and firmware version of the printer.
This shows n/a when the printer is not in the managed printer list or the printer status is sync fail.
MAC This field displays the MAC address of the printer.
To Next Page
Loading...
