3D Histech Pannoramic MIDI User Manual

Pannoramic MIDI 1.18 User’s Guide 3 Operating Slides and Trays
Note:
The distance between slide edges and the edges of the mounted
coverslip should be 1-2 mm, and they should be parallel with each
other.
Note:
FISH fluorescent signals become more easily detectable for the
scanner, therefore resulting in a brighter and better image, by treating
the slide with a formula that prevents rapid photobleaching of
fluorescent reagents (e.g. VECTASHIELD® Fluorescent Mounting
Medium by Vector Laboratories and ProLong® Gold and SlowFade®
Gold antifade reagents by Invitrogen) during the FISH protocol.
For further information, see the homepages of the manufacturers:
http://www.vectorlabs.com/ and http://www.invitrogen.com.
3.2 Affixing Barcode Stickers to Slides
This section describes how to affix barcode stickers to slides. Barcodes enable virtual slide
identification.
Figure 6 – Slide with a barcode sticker
The label area is recorded by the preview camera, and can be displayed by the control and viewer
software.
April 3, 2014 - Rev 1 3DHISTECH Ltd. 26(127)

3D Histech Pannoramic MIDI Specifications

General

Brand	3D Histech
Model	Pannoramic MIDI
Category	Laboratory Equipment
Language	English