3D Histech Pannoramic MIDI User Manual

Pannoramic MIDI 1.18 User’s Guide 4 Software Description
4.4.6 Start scan
To start digitization process, click after checking settings on the Barcodes panel.
Caution!
Before starting digitization process ensure that you have enough free
space on the destination drive. You can check the available free disk
space in the last line (Available disk space) of the information area of
Current Slide Scan Progress (see Figure 48).
In the scanning process log window (in the right bottom of the application window) a timestamp is
added to each step of the scanning process. The logs can be erased by clicking the Clear button or
saved as a text file by selecting Save to file.
Figure 48 – Information on scan progress
You can interrupt a running digitization process by clicking . This button is only enabled
if a digitization process is in progress.
If you have interrupted a digitization process, the slide currently being digitized is placed back into its
tray.
The first selected slide is loaded into the specimen holder. The preview camera creates a preview
image. It also creates an image of the barcode area.
If a running digitization process is interrupted, and you want to continue scanning, click .
April 3, 2014 - Rev 1 3DHISTECH Ltd. 72(127)

3D Histech Pannoramic MIDI Specifications

General

Brand	3D Histech
Model	Pannoramic MIDI
Category	Laboratory Equipment
Language	English