Pannoramic MIDI 1.18 User’s Guide 4 Software Description
4.8 Using Profiles
Note:
Saved profile settings cannot be transferred to and used on another
control computer and if using a different type of scanner.
If you want to scan a group of slides, it is advised to save your settings previously in a profile and
continue scanning in Automatic mode. You can save the following settings in a profile:
Scan Mode
• Brightfield
• Fluorescent
Scan Options
• Focus frequency (in Fluorescent mode)
• Focus frequency (in Brightfield mode)
• Compression procedure
• Use of a fixed compensation image (in Brightfield mode - ON/OFF)
• Use of stitching (ON/OFF)
Determination of the area to be scanned
• Use of automatic threshold specimen
• Use of specimen threshold value
• Use of marker pen threshold and specimen threshold values
• Use of scan everything within marked area (ON/OFF)
• Remove coverslip function (ON/OFF)
• Filling of holes (ON/OFF)
• Use of removing specks according to the set value (ON/OFF)
• Use saved scan area
• Use selection box (ON/OFF)
April 3, 2014 - Rev 1 3DHISTECH Ltd. 105(127)
To Next Page
