Pannoramic MIDI 1.18 User’s Guide 4 Software Description
Manual Exposure
By selecting the Use manual exposure times, you can determine the exposure times. The
values are typically set on Auto, meaning that the exposure times are determined
automatically.
After selecting the corresponding filter and activating the live image, you can preset an
exposure time in the Exposure value field.
It is recommended to go to various positions in order to determine the intensity distribution
throughout the specimen and define a representative value. You can accept the value for
presetting by clicking Set Value. Repeat the procedure for all other filters.
4.5.5 Service panel
This panel contains control and maintenance functions.
Figure 57 – Service panel
Emergency Manual Slide Removal Position
The specimen holder will be moved to a position where the slide can be removed manually
after opening the cover (see section 5.3.1 Opening the protective covers).
Slide Removed Manually
Click this button to notify the software that you have removed the slide manually.
Show images during scanning
If you select this option, you will be able to see the currently scanned image field during
scanning in the live image display field. This slows down digitization process and should be
activated only with purpose.
April 3, 2014 - Rev 1 3DHISTECH Ltd. 88(127)
To Next Page
Loading...
Need help?
General
