Pannoramic MIDI 1.18 User’s Guide 4 Software Description
1M does not change, the number after 1M represents the slide position. In this example,
the name indicates a slide in position 10.
You can also define names for the slides in the table below, by entering names into the
column Names / Barcodes. You can also define profiles in the selection boxes in column
Profiles if you intend to use different profiles for slides.
• Only those positions are active that have slides in it.
• Current Profile is the profile loaded in Routine Work / Scan Profiles.
You can save the entered names and assigned profiles by clicking
. You can define a name before saving. The information will be
saved in a CSV format:
1;<slide position>,<slide name>,<profile name>
You can export this information into Excel where you can change the data and save it again
in CSV format.
You can import previously saved names and assigned profiles by clicking
.
You can delete all entries from the table by clicking .
April 3, 2014 - Rev 1 3DHISTECH Ltd. 68(127)
To Next Page
Loading...
