51
Setting the date
Step7 Set the date using the following keys.
RE-ZERO (＋)key
....
To increase the value by one.
MODE (－)key
...........
To decrease the value by one.
SAMPLE key
..........
To select the digits to change the value.
The selected digits blink.
PRINT key
..............
To store the new setting, display end and go to
step 8.
CAL key
..................
To cancel the new setting and go to step 8.
Quitting the operation
Step8 The balance displays the next menu（Cp fnc）of the function table.
Press the CAL key to exit the clock and calendar function and return
to the weighing mode.
Note Do not enter invalid values such as a non-existing date when
setting the time and date.
When the clock backup battery has been depleted, the balance
displays rtc pf . Under this condition, press any key and set
the time and date. The dead battery only affects the clock and
calendar function. Even so, the function works normally as long
as the AC adapter is connected to the balance.
To Next Page
Loading...
