Aastra 415 - Page 134

Installation
134
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Connection
The EFOP fan-out-panel comprises 5 connection blocks of 10 RJ45 sockets each.
The line switchover is carried out on the two left-hand connection blocks. The
three right-hand connection blocks are used for separating the four-fold assigned
RJ45 sockets FXS1-4 and FXO1-4. The unassigned connection blocks can be used
for other purposes.
The diagram below shows the connection between an EFOP fan-out-panel and 4
emergency phones and 4 analogue exchange lines.
Fig. 60 Connection of EFOP fan-out-panel (example)
The patch cables are available separately in lengths of 1 and 2 m (see "Equipment
Overview", page 245).
The internal wiring of the 3 connectors right is shown in the table below. The wir-
ing is shown for sockets 1 - 4. Sockets 5 - 8 are wired accordingly.
1
3
42
1
2
3
4
1
2
3
4
EFOP
1
3
2
4
PSTN
PSTN
1 PSTN 3
FXS 1-4 1
3
5
7 1-4
3
1
1 PSTN 3
FXS 1-4
3
1
2
PSTN 442
FXO 1-4
2 PSTN 442
FXO 1-4
8 5-8642
FXO
1...4
FXS
1...4