Installation
121
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Terminals
The following system terminals can be operated on the DSI-AD2 bus:
• Aastra 5300 series system phones
1)
•AastraDECT radio units
The system phones on an DSI-AD2 bus are addressed via a single-digit terminal se-
lection digit (TSD).
Example:
The address of a system phone with TSD 2 on DSI interface 3.5 is 3.5-2.
4. 7. 3. 2 BRI-S terminal interfaces
With the appropriate interface cards and Wiring Adapters, BRI-S terminal interfaces
can be made available at RJ45 sockets 1.x...4.x (for Aastra 415 only 1.x and 2.x). The
possible RJ45 sockets are highlighted in colour in the figure below.
Fig. 45 Connection possibilities for BRI-S terminal interfaces
Notes
– Some of the interfaces can be configured on BRI-T using the wiring
adapters (see "Wiring Adapter", page 98).
– The maximum number of interfaces per communication server has to
be taken into account (see Tab. 30).
1)
Office 10, Office 25, Office 35, Office 45/45pro are supported as before
To Next Page
Loading...
