Configuration
168
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
sends it the connection parameters. The communication server now sets up a se-
cure connection to the SRM server which switches together them with the connec-
tion to the SRM agent.
See also:
You can find instructions on how to set up Secure IP Remote Manage-
ment in the WebAdmin help on the IP remote management (SRM)
( =mw).
5. 3 User access control
Access to the configuration is password-protected. Any user wanting to log in to a
communication server is prompted for his user name and password (access data).
5. 3. 1 User accounts and authorization profiles
A user's authorizations are regulated by authorization profiles, which are assigned
to the user accounts.
5. 3. 1. 1 User accounts
Default user account for initial access
The default user account (admin) and several authorization profiles are created
when a new communication server is opened or after a first start. The default user
account is linked with the authorization profile Administrator. This authorization
profile is assigned the administration rights for the User access control for Audio ser-
vices and for WebAdmin at the Administrator authorisation level.
The required user accounts and authorization profiles can be set up using the de-
fault user account.
To access the default user account (Default User Account) enter the following:
Tab. 80 Standard user account and standard password
Note:
To prevent unauthorised access to the communication server, it is neces-
sary to modify the default password during first access. For password
selection and input, see "Password syntax", page 170.
User name admin
Password 33aastra
To Next Page
Loading...
