Expansion Stages and System Capacity
39
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
3. 2 Basic system
Aastra 415and Aastra 430 are based on the same basic system, they differ in terms
of the components fitted to the mainboard, the expansion possibilities and the sys-
tem capacities. The basic systems consists of the following components:
• Mainboard with front panel, screw covers and designation label integrated in
metal housing with detachable plastic cover
• Power supply unit with power cord
3. 2. 1 Interfaces, display and control elements
The following mainboard interfaces can be accessed only when the housing cover
of the communication server is open:
Tab. 13 Mainboard
The following interfaces, display and control elements of the mainboard are routed
to the front panel:
Tab. 14 Front panel
Interfaces
Aastra
415
Aastra
430
Designation / Remarks
Slots for interface cards 2 4 IC1...IC4 / with snap mechanism
Slots for system modules, type 1 1 1 SM1 / three system modules, stackable
Slots for system modules, type 2 – 1
1)
1)
Not used at the moment
SM2
Slots for wiring adapters 2 4 WA1...WAx / one slot per wiring adapter
Slot for EIM card 1 1 EIM / card holder
Fan interface
2)
2)
The fan is required only if the Aastra 430 is rack-mounted
– 1 FAN / 3-pin connector (Aastra 430 only)
Interfaces
Aastra
415
Aastra
430
Note
DSI terminal interfaces 2 4 RJ45 socket
FXS terminal interfaces 2 2 RJ45 socket
Ethernet interfaces 10/100BaseT, half/full-duplex 2 2 RJ45 socket
RJ45 sockets on front panel, total 16 24 RJ45 socket
Audio input 1 1 3-pin jack socket
Supply input 1 1 2-pin supply socket
Pilot key 1 1
LED display 1 1
To Next Page
Loading...
