Aastra 415 - Firmware System Aastra SIP-DECT

Operation and Maintenance
190
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
system will initiate an Air-Download. The firmware is loaded from the communica-
tion server onto the cordless phones via radio and stored in the Flash memory.
To be able to run an Air-Download, you need to ensure that the cordless phone
contains a functional firmware.
The cordless phone remains fully functional during an Air-Download. The new
loaded firmware is activated only once the Air-Download has been successfully
completed. A restart is carried out on the cordless phone.
6. 2. 4 Firmware System Aastra SIP-DECT®
With Aastra SIP-DECT® and Aastra 600d series phones comprehensive solutions can
be provided for wireless telephony on IP-based networks. This requires RFP radio
units that can be directly connected to other VoIP devices on the LAN. OpenMobili-
tyManager (OMM) is installed on one of the RFP radio units or on a PC, which con-
stitutes the management interface for the Aastra SIP-DECT® solution. Aastra 600d
phones have loaded a different firmware in an Aastra SIP-DECT® system from the
one in an Aastra 400 DECT system.
The firmware for the RFP radio units and for the Aastra 600d cordless phones is
preferably located on a firmware server. Automatic firmware update is then possi-
ble. The WebAdmin view Configuration / System / DECT/SIP-DECT / SIP-DECT ( =9y)
contains a global predefined Aastra FTP-Server. Various firmware versions are
stored on this server, according to different communication server software re-
leases. The predefined entry in WebAdmin is adjusted to each communication
server release if necessary. You can also indicate the address of another firmware
server.
Firmware designations for Aastra SIP-DECT® (examples):
aafon6xxd.dnld:
Firmware for Aastra 600d cordless DECT phones.
iprfp3G.dnld:
Firmware for OpenMobilityManager (OMM).