Installation
79
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
4 Installation
This Chapter tells you how Aastra 415/430 can be installed and the conditions
to be observed. It also includes the mounting into a 19” rack, the correct way
to connect the earthing, and the power supply. Other topics described in this
Chapter comprise fitting with system modules, interface cards and the rele-
vant Wiring Adapters. Finally the Chapter also describes the network- and ter-
minal-side connection of the interfaces and the installation, powering and
connection of system terminals.
4. 1 System components
The figure below shows the components of the Aastra 415/430 communication
server complete with mounting options.
Fig. 11 System components with mounting options
To Next Page
Loading...
