Configuration
173
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
All enabling types have equal authorization status. This means that remote mainte-
nance access can be enabled using a function code for example, and then barred
again using the WebAdmin in general maintenance settings ( =t0) or with the
System Assistant on the Office 45.
When remote maintenance access is activated, the event message Remote mainte-
nance on is sent to the local printer and to all the terminals registered in message
group 8.
Remote maintenance access can be enabled or barred using the function codes
both from the idle state and the talk state, e.g. after an enquiry.
The authorisation to activate or bar remote maintenance access using the function
code is defined and granted to the user with the parameter Remote maintenance
access in a permission set ( =cb).
After a first start of the communication server, the authorizations of all users are re-
stricted.
Note:
It is advisable not to keep the remote maintenance access permanently
activated. This ensures that the communication server data cannot be
manipulated from a remote location by unauthorized persons.
5. 4. 2 Function code for remote maintenance access
Tab. 81 Function code for remote maintenance access
When remote maintenance access is enabled using function code *754, access will
automatically be barred again once the remote maintenance process has been
completed. It is possible to bar remote maintenance manually using #754 before it
is initiated.
Remote maintenance access can be enabled permanently using the function code
*753. To bar access, the authorized user must enter the function code #753 manu-
ally.
The enabling or barring of remote maintenance access using the function code is
signalled in each case by an acknowledgement tone.
Remote maintenance access can also be enabled or barred in WebAdmin or with
the System Assistant function on the Office 45, if the relevant authorization has
been given.
Enable/bar a one-off remote maintenance access *754 / #754
Enable/bar a one-offpermanent maintenance access *753 / #753
To Next Page
Loading...
