Installation
88
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Fig. 16 Placing two communication servers above each other inside a 19” rack
4. 2. 7. 1 Rack-mounting procedure
Materials required:
• Aastra 415 and Aastra 430 rack-mounting kit
• Screw set for wall/desktop installation
• Screwdriver
To rack-mount an Aastra 415/430 proceed as follows:
1. Pull off the screw covers on the left and right of the front panel.
2. Secure the mounting plates to the communication server using the M4 screws.
Make sure the front panel and the mounting plate are aligned.
3. Shut down the communication server (see "Shutdown Mode", page 211) and
disconnect it from the power supply.
To Next Page
Loading...
