Aastra 415 - Application Command Mode; Feature Mode

Operation and Maintenance
208
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
6. 4. 3. 3 Feature Mode
Feature Mode means that the system software is running fault-free, but that a spe-
cial function (feature) is active. Depending on the function the LEDs display the fol-
lowing combination patterns:
Tab. 91 Combination patterns in Feature Mode
Mutual combinations of patterns [14], [15] and [16] are possible as are combina-
tions with patterns [12] and [13].
Aastra Intelligent Net:
In an AIN the offline mode of a satellite is indicated by the green-orange
flashing SYS-LED. Combinations with the patterns of the Normal Mode
and Feature Mode are possible.
Exception: Pattern [14] (prebarred system) takes priority over the offline
mode display.
6. 4. 3. 4 Application Command Mode
The Application Command Mode can be used to shut down or restart the commu-
nication server with database backup. It is also used to enable or disable password-
free access (pattern[15]15) and remote access to the AIN via an external dial-up
connection (pattern[16]).
The Application Command Mode is indicated by the SYS-LED flashing green-or-
ange.
The Application Command Mode is entered pressing and holding down the control
key (LC) in Normal Modus. Combination pattern [17] is displayed once the Applica-
tion Command Mode has been entered.
Tab. 92 Patterns after entering the Application Command Mode
The Application Command Mode is exited automatically if no input is made within
20 seconds; the system returns to Normal Mode.
Pattern
No.
F0 F1 F2 F3 F4 SYS Meaning
[14] System is prebarred
[15] Enable the password-free access for configu-
ration via Ethernet.
[16] Remote access to AIN enabled via an external
dial-up connection.
Pattern
No.
F0 F1 F2 F3 F4 SYS Meaning
[17] Application Command Mode active
– – – – –
–
O
– – –
O
–
–
G
– – – –
O
–
G
R
– – – –
G
O