Aastra 415 - Replacing System Terminals; DECT Terminals; DSI System Phones

Operation and Maintenance
199
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
6. 3. 7 Replacing system terminals
6. 3. 7. 1 DSI system phones
Phones with the same level of added features
Replacing a defective phone
Once the defective DSI system phone has been replaced by an identical phone the
terminal configuration data is automatically transferred.
Relocating a phone
The assigned port can be modified in the terminal configuration via WebAdmin,
and the phone connected on the new slot. The terminal configuration data is pre-
served.
Phones with a different level of added features
If a phone is replaced with another type of phone, most of the terminal configura-
tion data can be taken over using Multi edit. A separate Multi edit (keys) function is
available for the key configuration. Details can be found in the WebAdmin help for
the view Standard terminals ( =qd).
6. 3. 7. 2 DECT terminals
Replacing a radio unit
1. Dismantle the defective radio unit.
2. Fit the new radio unit.
Note:
If the ports of a radio unit are to be changed or if a radio unit is no longer
used, it is important to remove the radio unit in the system configuration.
If not, start-up problems may occur when another radio unit is connected
to the same ports.