Configuration
179
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
A restart can be achieved in the following ways:
• With the pilot key on the front panel
See "Carrying out a first start", page 215
• With WebAdmin in the maintenance settings
With the First start button in the System reset( =4e) view.
Notes:
– A first start deletes all the configuration data already stored and
replaces it with the default values of the sales channel. You should
therefore always back up the configuration data prior to a first start by
using a data backup .
– The first start is triggered immediately. All the active call and data con-
nections are interrupted.
Starting the communication server for the first time and resetting the
sales channel
With the First start and reset sales channel button for the maintenance settings in
the WebAdmin System reset ( =4e) view, you have the possibility for a first start to
also delete the sales channel and licence code. During the next start, you will be
prompted for the sales channel and licence code. Note that the licence code is de-
pendent on the sales channel and that you can no longer use the existing licence
code.
Note:
This function is only accessible for Administrators in Expert mode.
5. 6. 4 Data backup
With a configuration data backup all the configuration data of the communication
server is stored in a compressed file in ZIP format. You can let the configuration
data backup run automatically (Auto backup) or as required (Manual backup).
You can automatically copy the auto-backup files to an FTP server or e-mail them.
With an audio data backup all the audio data of the communication server is stored
in a compressed file in ZIP format. The backup of the audio data can only be done
manually.
You can find the settings for auto-backup and distribution service in the
WebAdmin Maintenance / File backup ( =um) view, where you can also test them.
Moreover, in this view you can see the available backups of the auto-backup func-
tion; you can restore or delete them and even create and restore manual backups.
To Next Page
Loading...
