Configuration
172
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
5. 3. 6 Access log
An access log with 20 entries is drawn up for each user account so that the history
of accesses to the configuration can be tracked. Denied access attempts using erro-
neous or incorrectly type passwords are also logged. The logs can be read by each
user (authorization level) Administrator in Expert mode required).
Retrieving the log data
The system monitors all the accesses and failed access attempts and saves them in
the file system of the communication server. These lists can be retrieved locally or
remotely. ( =ez or =z3).
CLIP verification
If in the general maintenance settings ( =t0) of the parameter CLIP required is ac-
tivated, remote maintenance is only possible if the retrieving party is using a CLIP.
The CLIP number is also recorded by the access log.
Entering the processes in the log
Each access attempt generates an entry in the corresponding list.
In case of remote maintenance an entry will not be generated if remote mainte-
nance is barred or if CLIP required is activated in the configuration and no CLIP is re-
ceived.
5. 4 Remote access
With a remote maintenance access the user is authenticated using his user name
and password. The user account must also be assigned an authorization profile in
which the interface access Remote maintenance dial-up access is enabled. This also
applies to SRM (Secure IP Remote Management), secure IP remote management.
5. 4. 1 Access enabled by local users
Remote maintenance access can be enabled in three ways:
• Using function codes (see page 173)
• With WebAdmin
• With the System Assistant on the Office 45
It can be revoked again automatically or manually.
To Next Page
Loading...
