Annex
248
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Digital terminal interface BRI-S
•Standard Euro ISDN interface
• Phantom power supply min. 140 mA, limiting at approx. 170 mA, terminal volt-
age 36…41 V
• Up to 8 terminals can be connected
• Maximum of 2 simultaneous call connections
Analogue terminal interface FXS
• Configurable multifunctional interface for connecting analogue terminals and
equipment.
• The following applies for the FXS mode Phone / Fax, two-wire door and general
bell:
– Voice path with A/D and D/A conversion (standard PCM, A-law)
– Transmission as per ES 201 168 (level country-specific)
– Constant-current loop supply approx. 25 mA (with loop resistance 1000 )
– Receive pulse or DTMF dialling
– CLIP display on all analogue terminal interfaces (only on 2 analogue terminals
simultaneously).
– Ringing supply 40…43 V 50 Hz at load 4k; no DC voltage overlay (country-
specific versions also with 25 Hz)
– No control key detection
– No charge signalling pulses
• For more technical details and cable requirements see "Multifunctional FXS in-
terfaces", page 127.
7. 4. 3 Communication server
Tab. 120 Dimensions and weights
Aastra 415/430 for wall
mounting
Aastra 415/430 in rack
mounting
Height 65 mm 65 mm
Width 360 mm 483 mm
Depth 294mm 294mm
Weight (excl. mains cord, interfaces cards, modules
and packaging)
2.4 kg 2.5 kg
To Next Page
Loading...
