Aastra 415 - Event Types

Operation and Maintenance
219
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
6. 5. 1. 1 Event types
Tab. 100 Event types, in alphabetical order
Event / error message Trigger condition Details
Aastra Dialer within the
licence limit again
Aastra Dialer user licences are now available
again.
Date, time
Aastra SIP terminals within
the licence limit again
Aastra SIP Terminals and Aastra Video Terminals
licences are now available.
Parameter 1=1: Aastra SIP Ter-
minals licence, parameter 2=1:
Aastra Video Terminals licence,
data, time
Applications card CPU2: Data
communication out of service
Data communications with the CPU2 applica-
tions card have been interrupted for an unusu-
ally long period of time (> 1 hour) due to an
error (after a Windows update or for other rea-
sons).
Date, time
Applications card CPU2: Data
communications back in ser-
vice
Data communications with theCPU2 applica-
tions card have been restored.
Date, time
ATAS: connection established ATAS: connection (re) established date, time
ATAS: Connection lost ATAS: connection lost Cause (0: Logoff, 1: missing
cycle signal), date, time
BluStar Client within the
licence limit again
A sufficient number of licences is now available
again for BluStar clients.
Parameter 1: 0 (not used)
Licence type: 0 and 1: (not used), 2: BluStar CTI,
3: BluStar softphone, 4: BluStar video option,
5: BluStar Presence Option
Parameter 1, licence type, total
purchased licences, date, time
Card in service A card that was previously out of service is back
in service again.
Number of the expansion slot,
date, time
Card out of service A card previously in operation has stopped
functioning.
Number of the expansion slot,
date, time
Card reset A reset was carried out for one card Number of the expansion slot,
date, time
CL printer available again Printout on the system printer available once
again
Date, time
CL printer blocked • No response from system printer for past 4
minutes
• Printer out of paper or switched off
Interface, interfaces/card num-
ber, port number, date, time
Compatible PMS application The external hotel management system (PMS
application) is suitable for communicating with
the communication server.
Date, time
Connection to PMS system
established
A connection with a hotel management system
(PMS system) has now been successfully estab-
lished.
Date, time