EasyManua.ls Logo

Aastra 415 - Page 220

Aastra 415
270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation and Maintenance
220
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Connection to PMS system
failed
An unsuccessful attempt was made to establish
a connection with a hotel management system
(PMS system).
Reason: 1: Call rejected, 2: Destination unob-
tainable, 3: Destination busy, 4: Connection
timeout, 5: Wrong address, 6: Unknown error
Error, date, time
Creation instance on backup
communication server failed
The backup communication server was unable
to create or modify a user or terminal instance
with the received configuration data.
Note:
This event message is generated by the backup
communication server.
Instance type (0: User,
1: terminal), user number or
terminal ID, date, time
Creation instance on backup
communication server suc-
cessful
The backup communication server was able
(following one or more previous failed
attempts) to create or modify a user or terminal
instance with the received configuration data.
Note:
This event message is generated by the backup
communication server.
Instance type (0: User,
1: terminal), user number or
terminal ID, date, time
CSTA sessions within the
licence limit again
CSTA Sessions licences are now available again. Number of licences, date, time
CTI first party: Connection
established
The ATPC3 first-party link was (re)established User number, date, time
CTI first party: Connection
lost
The ATPC3 first-party link was interrupted
because the cycle signal is missing.
User number, date, time
CTI third party: Connection
established
The ATPC3 third-party link was (re)established Date, time
CTI third party: Connection
lost
The ATPC3 third-party link was interrupted Cause (0: Logoff, 1: missing
cycle signal), date, time
Definitive activation licence
missing
The initial temporary activation of the commu-
nication server for a certain duration (e.g. 90
days) was started. After this period, the com-
munication server switches to restricted oper-
ating mode (see "Restricted operating mode",
page 69).
Date, time
Definitive activation licence
now present
A licence code with a definitive activation
licence was entered.
Date, time
Dual Homing within the
licence limit again
There are now enough licences available for
registering SIP phones in the Aastra 6700i/
6800i series on a backup communication
server.
Note:
This event message is generated by the backup
communication server.
Date, time
E-mail send failed The system was unable to send an e-mail
because an error occurred.
Meaning of the parameter values in Tab. 101
Cause/action, e-mail client,
additional information, date,
time
Event / error message Trigger condition Details

Table of Contents

Other manuals for Aastra 415

Related product manuals