Installation
84
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
4. 2. 5. 2 Drilling plan
The communication server is suspended into two premounted wall screws using
the suspension points in the housing base. Depending on the type of mounting,
these are the suspension points marked under position A or B on the drilling plan.
The communication server is secured with a third screw to prevent it from being
dislodged accidentally (position C).
All dimensions in mm
Fig. 14 Drilling plan for Aastra 415/430 wall mounting
To Next Page
Loading...
