Installation
139
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Fig. 63 Jumper configuration for connecting a door intercom
Note
If the options card is fitted to slot IC2 (Aastra 415) or slot IC4 (Aastra 430),
the jumpers of Ports 1, 2 and 3 must be fitted as shown in Fig. 63.
Tab. 65 Connection in slot 2 (Aastra 415) or Slot 4(Aastra 430)
RJ45
Communica-
tion server
RJ45
Communication
server
Socket X1 Pin Signal Socket X3 Pin Signal
1– 1 –
2– 2 –
3 KT1 3 Tb (without DC)
4 TS2 4 Ta’ (with DC)
5 TS1 5 Tb’ (with DC)
6 KT2 6 Ta (without DC)
7– 7 –
8– 8 –
Socket X2 Pin Signal Socket X4 Pin Signal
1– 1 –
2– 2 –
3TO2 3 –
4IO4 4 –
5IO4 5 –
6TO1 6 –
7– 7 –
8– 8 –
To Next Page
Loading...
