Aastra 415 - Page 212

Operation and Maintenance
212
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Hardware:
BBT Integrity Check: Incon-
sistent Bad Block Table
Replace communications
server
Hardware:
BBT Integrity Check: ECC has
detected an uncorrectable
read error
Replace communications
server
Hardware:
BBT Integrity Check: Block 0 is
faulty; the Bad Block Table
cannot be used
Replace communications
server
Software:
Version transfer not possible:
The country and/or sales
channel in the EIM card does
not match the configuration
data in the Flash
Using WebAdmin set a
different EIM card and / or
sales channel.
Software:
Version transfer not possible:
Software release unknown.
Load new system soft-
ware onto mainboard
Software:
Incompatible Boot software
Contact Support. A differ-
ent Boot software may
have to be loaded.
Software/Hardware:
General copy error
Load correct system soft-
ware onto mainboard or
replace communication
server.
Software:
Copy error between file sys-
tem and DRAM
Load correct system soft-
ware onto mainboard or
replace communication
server.
Factory Server Error:
No DHCP
For the manufacturer
only
Factory Server Error:
No TCP connection
For the manufacturer
only
Software:
corrupt file system
Contact Support. The file
system must be reformat-
ted.
Software:
Emergency Upload
Functional system software
no longer available
New system software
must be loaded with EUL
via LAN (see page 187).
Software:
General boot error
Contact Support. A differ-
ent Boot software may
have to be loaded.
Software:
General error
Load new software onto
mainboard. If unsuccess-
ful, contact Support.
F0 F1 F2 F3 F4 SYS Category / Description Remedy
– –
R
R
–
––
RR
R
– –
R
R
R
––
RR
R
–
R
– – –
––
RR
R
–
R
– –
R
––
RR
R
–
R
–
R
–
––
RR
R
–
R
–
R
R
––
RR
R
–
R
R
– –
––
RR
R
–
R
R
–
R
––
RR
R
–
R
R
R
–
––
RR
R
–
R
R
R
R
––
RR
R
R
– – – –
––
RR
R
R
R
R
R
R
––
RR
R
– – – – – –
––
RR
R
––
RR
R
––
RR
R
––
RR
R
––
RR
R
––
RR
R