Expansion Stages and System Capacity
57
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Authorization profiles for user accounts 25 25 25
Log entries per user account 20 20 20
First-party CTI users via LAN 10 32 32
First-party CTI users via Aastra Dialer 10 32 32
Third-party CTI interfaces 1 1 1
Third-Party CTI interface (Basic, Standard) 10 50 50
Groups, Agents (Call centre) 10 30 50
Mailboxes with Basic or Enterprise voice mail system 20 100 100
Greetings per mailbox 3 3 3
Profiles per mailbox for auto attendant 3 3 3
Call data memory internal (number of records) 300 300 300
Private contacts 8000 8000 8000
Call list entries for each of the 3 call lists per phone 30 30 30
Total call list entries 15000 15000 15000
Configured keys 4000 4000 4000
Busy lamp field keys on Aastra SIP phones in total 200 200 200
Busy lamp field keys per Aastra SIP phone 50 50 50
Same users on busy lamp field keys on Aastra SIP phones 10 10 10
Expansion key modules on DSI terminals 30
4)
60 100
Expansion key modules on IP system phones 30
4)
60 100
Expansion key modules Aastra M670i, Aastra M675i,
Aastra M680i, Aastra M685i
30
4)
60 100
Alpha keyboardAastra K680i 10 50 50
Alpha keyboard (AKB) 10 40 50
1)
Up to 20 users are possible with virtual terminals and integrated mobile phones.
2)
Up to 100 users are possible with virtual terminals and integrated mobile phones.
3)
Only 1 operator console, 1 Aastra 2380ip, 1 BluStar 8000i, 1 Aastra BluStar for PC and 2 DECT- cordless
phones are possible for each user.
4)
Limited by the maximum number of terminals
5)
In the Secure VoIP modes the maximum values cannot be achieved with the selection i the DSP settings:
Aastra 415: Secure G.711VoIP mode: 1 7 = 7 channels, VoIP mode Secure G.711/G.729: 1 5 = 5 channels.
Aastra 430: Secure G.711VoIP mode: 2 7 = 14 channels, VoIP mode Secure G.711/G.729: 3 5 = 15 channels.
6)
Of relevance only to certain countries such as Brazil
7)
12 of them are masked (not configurable)
8)
With global call distribution
9)
Depending on the phone type
10)
The value applies to CDE with destination KT line. With multiple destinations (User + KT or KT + UG) the
value is reduced to 4.
11)
Depending on the highest number of line keys, configured for the same line. The following pairs apply (line
keys per line / total line keys): (8/24), (7/28), (6/36), (5/50), (4/60), (3/60), (2/60), (1/60).
Max. number... Aastra 415 Aastra 430
AIN with
Aastra 430 as
Master
To Next Page
Loading...
